Basic Info.
After-sales Service
One Year
Plate
Lithography Printing
Color & Page
Multi-Colour Printing Press
Usage
Paper Printer, Label Printer, Card Printer, Cloths Printer, T Shirt etc
Automatic Grade
Automatic
Printing Interface
USB3.0
Printing Speed
4pass:16m2/H
System Supported
Windows 7/10
Product Name
Wide Format Dtf Printer 60cm with 2 Printhead
Print Dimension
Max Width 61cm
Print Heads
XP600, I3200, 4720 etc
Printing Software
Rip Software
Cleaning Method
Automatic Cleaning Function
Transport Package
Plywood Box
Specification
wide format 24"
Product Description
Product Description
Wide Format DTF printer 60cm with 2 printhead Epson I3200
What is DTF Printing?
Direct to Film printing is a method that rivals Direct to Garment printing (DTG) and allows users to print their logos or artwork onto a special type of coated PET film.
This film is then used to transfer the printed image onto textiles using a lightweight powder adhesive that can be applied manually, or via an automatic powder shaker used to distribute the adhesive evenly across the artwork & film.
The adhesive powders and specialty inks used in DTF printing are critical in delivering a final product that looks well and lasts for a long time.
DTF printing technology's strongest selling point would be it ablity to work on almost every type of fabric
without the need for pre-treatment, while being able to product sharper and more vibrant colours.
We have everything you need to get started with Direct to Film printing!!!
Specification
| 60cm DTF printer with Dual i3200 printheads |
| Max Printing Width | 610mm |
| Print Head | EPSON I3200 |
| Number of Print Head | 2 |
| Printing Speed | 4Pass:16m2/h, 6Pass:13m2/h, 8Pass:10m2/h |
| | |
| Printing Accuracy | 360*2400dpi, 360*3600dpi, 720*2400dpi |
| Ink Type & Configuration | Textile Pigment Ink C/M/Y/K/W |
| Printing software | Maitop 6.1 / photoprint |
| Heating Method | Pre-heater, Printing bed heater, Rear heater 30-65ºC |
| Working Conditions | Temperature 20-28ºC, Relative Humidity:65%-75% |
| Language | Chinese/English |
| | |
| Working Power Supply | 220v/110v, 50HZ/60HZ |
| Power | Printer: 350w
Powder Dryer: 2500w |
| Package Size | Printer: 1460*740*680mm
Dryer: 1350*940*1220mm |
Our Advantages
High productivity
This type of printer printing width max 61cm, helping you greater output from the same time amount of input.
Epson Printer Head
Our printer used Epson printer head, and you can custom install 2 or 4 espon head for customized printer.
Widely Use
Works with almost all types of fabrics.
1 Year Warranty
We will provide you instant online support service and free repair service.
DTF process
The DTF process is as simple in its working as its name suggests - Print on a film and directly transfer onto fabric.Step 1 - Print on Film
Instead of regular paper, insert the PET film in the printer trays. First print the entire image in white on the PET film. After this, using the appropriate color settings the in printer, print the required image on the white image layer. The important point to remember is that the print on the film must be a mirror-image of the actual image that needs to appear on the fabric.
Step 2 - Powdering
This step is the application of hot-melt powder on the film that has the printed image on it. The powder is applied uniformly when the print is wet and the excess powder needs to be removed carefully. The important thing is to ensure that the powder is evenly spread all over the printed surface on the film. One very common way to ensure this is to hold the film at its short edges such that its long edges are parallel to floor (landscape orientation) and pour the powder in the middle of the film from top to bottom such that it forms an approximately 1 inch thick heap in the centre from the top to the bottom. Pick up the film together with the powder and slightly bend it inwards such that it forms a slight U with the concave surface facing oneself. Now rock this film from left to right very lightly such that the powder will slowly and evenly spread all across the surface of the film. Alternately, one can use automated shakers available for commercial setups.
Step 3 - Melting the powder
As in the name, the powder is melted in this step. This can be done in various ways. The most common way is to put the film with the printed image and the applied powder in the Curing Oven and heat. If the curing oven is unavailable, place the film inside the heat press and bringing the top of the press very close to the film but not touching it. There should be around 4 to 7 mm gap between the film and heat press top plate. One can use a metal wire to fasten the press top such that it does not totally close over the film and leaves a necessary gap. For best results, it is highly recommended to go by the manufacturer specification for powder melting. Depending upon the powder and equipment, the heating is generally done for 2 to 5 minutes with the temperature around 160 to 170 degree Celsius.
Step 4 - Pre-pressing
The step involves pre-pressing of the fabric prior to transfer of image by the film. The fabric is kept in the heat press and pressurized under heat for about 2 to 5 seconds. This is done to flatten the fabric and also ensure de-humidification of the fabric. The pre-pressing helps in proper transfer of the image from the film on to the fabric.
Step 5 - Transfer
This is the heart of the DTF printing process. The PET film with the image and the melted powder is placed on the pre-pressed fabric in the heat press for a strong adhesion between the film and the fabric. This process is also called 'curing'. The curing is done at a temperature range of 160 to 170 degree Celsius for approximately 15 to 20secomds. The film is now firmly attached to the fabric.
Step 6 - Cold Peel
It is important that the fabric and the now attached film on it cool down to room temperature before one pulls the film off. Since the hot-melt has a nature similar to amides, as it cools down, it acts as a binder that hold the colored pigment in the inks in firm adhesion with fibres of the fabric. Once the film is cooled, it must be peeled off the fabric, leaving the required design printed in ink over the fabric.
Step 7 - Post-pressing
This is an optional step but is very highly recommended for best results and high performance parameters like wash and rub fastness. In this step, the final fabric with the transferred design is pressed in the heat press for around 10 to 15 seconds.Our DTF printer is for printing on almost fabrics materials like cotton, nylon, dacron, polyester, canvas etc.
Used for T-shirt, shoes, socks, hoodies, sweater, jacket, bags ,pillow towel, Umbrella etc.
Company Profile
Packaging & Shipping
Related Products
Address:
Nanbaizhuang Village Shenze County, Shijiazhuang, Hebei, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery, Packaging & Printing, Textile
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Shenze Jiamei Screen Printing Co., Ltd. Was founded in 1999, located in Shenze, China. We are a company integrated manufacturing and sale. Over the years we have always concerned about the development of the screen printing industry, in close attention to quality and sales at the same time to improve our own. Our company′ s construction area is nearly 10000 square meters, each product has its own independent production workshop.
Our company mainly produce and supply squeegee, aluminum squeegee handle, wooden squeegee handle, aluminum screen printing frame, screen printing drying rack, screen printing parts series. All the product′ specification can be customized according to the customers. Squeegee workshop introduces advanced equipment, using advanced materials, professional and technical, good quality and cheap, all kinds of profiles of the screen frame, high output, good quality and cheap, timely delivery; Drying rack can according to the requirements of different size custom-made, quality assurance. Excellent after-sales service is assured of your choice.
With many years production experience in screen printing industry development. We have gained more advanced technology. Now our company have technicians with abundant knowledge and a lot of practice in this line. Our company has a good reputation and a large number of customers in Europe, America, Africa, the Middle East, Southeast Asia and other countries and regions.
With the best quality, reasonable price, prompt delivery, and good service promise sincerely with old and new customers with the benefit. Welcome to learn and visit in our factory.
){kind=link}